Differences between drivers (API 1 & API 2)
Looking for an older MHUB model?
- API 1: these are basic system switching drivers (IP or RS232) with one-way communication between the controlling device and the MHUB.
- API 2: these are advanced drivers (IP) which offer detailed two-way state reporting (volume and switch state etc), control, self discovery and auto IP healing depending on hardware support.
- API 2 drivers with Expanded IO: these drivers have advanced capabilities to send IR data from the control system to MHUB’s IO ports (CEC or IR).
Create your own integration
Coding your own interface or driver for MHUB is easy, and depending on what you create, we may even pay you for it! If you’re a coder or interested in making your own custom control software for MHUB you can download our API from here.
General purpose IR codes
Download general purpose IR codes for (4×4) and (8×8) systems here.
Join our developers Facebook Group
Get the most out of your HDA device by asking the community for helpful tips and hack on our Facebook group here.
Utility Drivers
| Control System | Name / Vendor | Type | API | Description | Supported Models | Link |
|---|---|---|---|---|---|---|
General Purpose Utility Drivers |
||||||
 |
CEC Display ControlBUILT BY INTRINSIC DEVELOPMENT (UK). DRIVER REQUIRES LICENSE ACTIVATION FROM VENDOR. |
CEC | IP (API 2) | Control a display using CEC from an MHUB or Zone Processor HDMI/HDBaseT output. Install this driver in to Composer and use it as a normal display driver. Ideal for turning displays on/off if they do not respond to IP or if IR is not possible (display must support standardised CEC commands). | uControl Zone Processor 5 MHUB U (4×1+1) 40 MHUB (4×4) 100A MHUB (6×6) 100A MHUB S (8+8×8) 100 MHUB S (8+8×8) 100A MHUB S (16+16×16) 100A MHUB S (16+16×16) 100ADM MHUB PRO 2.0 (4×4) 40 MHUB PRO 2.0 (8×8) 100 |
|
|
General RS232 DriverBUILT BY INTRINSIC DEVELOPMENT (UK). DRIVER REQUIRES LICENSE ACTIVATION FROM VENDOR. |
RS232 | IP (API 2) | Send any RS232 command to any available RS232 port on MHUB or Zone Processor hardware. Install this driver in to Composer and assign it to the RS232 port on MHUB or Zone Processor you wish to send commands to (display or source). Serial command controls such as baud rate, partity etc is configured from within the driver. | uControl Zone Processor 1/5 MHUB (4×4) 100A MHUB (6×6) 100A MHUB S (8+8×8) 100 MHUB S (8+8×8) 100A MHUB S (16+16×16) 100A MHUB S (16+16×16) 100ADM MHUB PRO 2.0 (4×4) 40 MHUB PRO 2.0 (8×8) 100 |
|
Current Models
16×16, 8×8 & 6×6
| System | Capability | Driver |
|---|---|---|
MHUB S (16+16×16) 100A/100ADM |
||
|
|
Unit discovery, auto IP healing, video switching, audio mode (set to source/follow output), line-level volume control, IR port access (Expanded IO), power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. I need help |
|
|
Video switching, audio mode (set to source/follow output), line-level volume control, IR and RS232 port access (Expanded IO), power (standby). YOU WILL NEED URC LOGIN CREDENTIALS FOR THE DEALER PORTAL TO DOWNLOAD DRIVER. |
|
|
Video switching, power (standby). |
|
MHUB S (8+8×8) 100/100A |
||
|
|
Unit discovery, auto IP healing, video switching, audio mode (set to source/follow output), line-level volume control, IR port access (Expanded IO), power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. I need help |
|
|
|
Video switching, audio mode (set to source/follow output), line-level volume control, IR and RS232 port access (Expanded IO), power (standby). YOU WILL NEED URC LOGIN CREDENTIALS FOR THE DEALER PORTAL TO DOWNLOAD DRIVER. |
|
|
Video switching, power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
Video switching, power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
Video switching, power (standby). | |
|
Video switching, power (standby). | |
|
Video switching, power (standby). | |
|
Video switching, power (standby). | |
|
|
Video switching, power (standby). | |
|
Video switching, power (standby). | |
MHUB PRO 2.0 (8×8) 100 |
||
|
|
Unit discovery, auto IP healing, video switching, audio switching, ARC, IR port access (Expanded IO), power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. I need help |
|
|
|
Video switching, audio mode (set to source/follow output), line-level volume control, IR and RS232 port access (Expanded IO), power (standby). YOU WILL NEED URC LOGIN CREDENTIALS FOR THE DEALER PORTAL TO DOWNLOAD DRIVER. |
|
|
|
Video switching, audio switching, ARC, power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
Video switching, audio switching, ARC, power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
Video switching, audio switching, power (standby). | |
|
|
Unit discovery, auto IP healing, video switching, audio switching, ARC, IR port access (Expanded IO), power (standby) | |
|
|
Video switching, audio switching, power (standby). | |
MHUB (6×6) 100A |
||
|
|
Unit discovery, auto IP healing, video switching, audio mode (set to source/follow output), line-level volume control, IR port access (Expanded IO), power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. I need help |
|
|
|
Video switching, audio mode (set to source/follow output), line-level volume control, IR and RS232 port access (Expanded IO), power (standby). YOU WILL NEED URC LOGIN CREDENTIALS FOR THE DEALER PORTAL TO DOWNLOAD DRIVER. |
|
|
|
Video switching, power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
Video switching, power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
Video switching, power (standby). | |
|
|
Video switching, power (standby). | |
|
|
Video switching, power (standby). | |
|
|
Video switching, power (standby). | |
|
|
Video switching, power (standby). | |
|
|
Video switching, power (standby). | |
4×4, 4×1, uControl Zone Processors & MZMA
| System | Capability | Driver |
|---|---|---|
MHUB PRO 2.0 (4×4) 40 |
||
|
|
Unit discovery, auto IP healing, video switching, audio switching, ARC, IR port access (Expanded IO), power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. I need help |
|
|
|
Video switching, audio mode (set to source/follow output), line-level volume control, IR and RS232 port access (Expanded IO), power (standby). YOU WILL NEED URC LOGIN CREDENTIALS FOR THE DEALER PORTAL TO DOWNLOAD DRIVER. |
|
|
|
Video switching, audio switching, ARC, power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
Video switching, audio switching, ARC, power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
Video switching, audio switching, power (standby). | |
|
|
Unit discovery, auto IP healing, video switching, audio switching, ARC, IR port access (Expanded IO), power (standby) | |
|
|
Video switching, audio switching, power (standby). | |
MHUB (4×4) 100A |
||
|
|
Unit discovery, auto IP healing, video switching, audio mode (set to source/follow output), line-level volume control, IR port access (Expanded IO), power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. I need help |
|
|
|
Video switching, audio mode (set to source/follow output), line-level volume control, IR and RS232 port access (Expanded IO), power (standby). YOU WILL NEED URC LOGIN CREDENTIALS FOR THE DEALER PORTAL TO DOWNLOAD DRIVER. |
|
|
|
Video switching, power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
Video switching, power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
Video switching, power (standby). | |
|
|
Video switching, power (standby). | |
|
|
Video switching, power (standby). | |
|
|
Video switching, power (standby). | |
|
|
Video switching, power (standby). | |
|
|
Video switching, power (standby). | |
MHUB U (4×1+1) 40 |
||
|
|
Unit discovery, auto IP healing, video switching, audio switching, ARC, IR port access (Expanded IO), power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. I need help |
|
|
|
Video switching, audio mode (set to source/follow output), line-level volume control, IR and RS232 port access (Expanded IO), power (standby). YOU WILL NEED URC LOGIN CREDENTIALS FOR THE DEALER PORTAL TO DOWNLOAD DRIVER. |
|
|
|
Video switching, power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
Video switching, power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
Video switching, power (standby). | |
|
|
Video switching, power (standby). | |
|
|
Video switching, power (standby). | |
uControl Zone Processors (1/5) |
||
|
|
CEC, IR port access (Expanded IO). LICENSE ACTIVATION REQUIRED BEFORE USE. I need help |
|
|
|
CEC, IR port access. LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
CEC, IR port access. | |
MZMA (6×4) 55 |
||
|
|
Audio switching, volume control, individual amp power (standby). |
|
|
|
Audio switching, volume control, individual amp power (standby). YOU WILL NEED URC LOGIN CREDENTIALS FOR THE DEALER PORTAL TO DOWNLOAD DRIVER. |
|
|
|
Audio switching, volume control, individual amp power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
Audio switching, volume control, individual amp power (standby). LICENSE ACTIVATION REQUIRED BEFORE USE. | |
|
|
Audio switching, volume control, individual amp power (standby). | |
|
|
Audio switching, volume control, individual amp power (standby). | |
|
|
Audio switching, volume control, individual amp power (standby). | |
Legacy/Discontinued Models
| Control system | Supported MHUB | API | Type | Comms Method | Features | Advanced IO | Download |
|---|---|---|---|---|---|---|---|
|
MHUB U (4×3+1)-(8×6+2), MHUB PRO (4×4/8×8), MHUB MAX (4×4) | 2 | Video Matrix | IP | Unit discovery, auto IP healing, switching, full state reporting with 2-way feedback, IP2IR (IR port expansion), power* |  |
 221kb |
|
MHUB AUDIO | 2 | Audio Matrix | IP | Unit discovery, auto IP healing, switching, volume control, full state reporting with 2-way feedback, power* | N/A | 117kb |
|
MHUB U (4×3+1)-(8×6+2), MHUB PRO (4×4/8×8), MHUB MAX (4×4), MHUB 4K (4×4/8×8), MHUB 2K (4×4/8×8) | 1 | Video Matrix | Serial & IP | Switching, power* | No | 226kb |
|
Multiroom+ V1, Multiroom+ V2, Multiroom + V3 | 1 | Video Matrix | IP | Switching, power* | N/A | 864kb |
|
3.52.636, 3.52.628 (UK-PKG-FF-44-HDBTLI), 3.50.62 (MOD44), 3.50.62 (MOD88) | 1 | Video Matrix | IP | Switching, power* | N/A | 107kb |
|
Made for Crestron Custom MHUB U (4×3+1)-(8×6+2), MHUB MAX (4×4), MHUB PRO (4×4/8×8) DRIVER REQUIRES ACTIVATION FROM VENDOR. |
2 | Video Matrix | IP | Switching, power* | N/A | Visit Website |
|
Made for Crestron Home MHUB U (4×3+1)-(8×6+2), MHUB MAX (4×4), MHUB PRO (4×4/8×8) DRIVER REQUIRES ACTIVATION FROM VENDOR. |
2 | Video Matrix | IP | Switching, power* | N/A | Visit Website |
|
Made for Crestron Home MHUB U (4×3+1)-(8×6+2), MHUB MAX (4×4), MHUB PRO (4×4/8×8) DRIVER REQUIRES ACTIVATION FROM VENDOR. |
2 | Display Driver | IP | Expose uControl CEC and IR capabilities (uControl CEC or IR Packs required) inside Crestron Home (or SIMPL Windows, using the SIMPL CCD Wrappers) with a generic display using MHUB or standalone ZP1 & ZP5. | |
Visit Website |
|
MHUB PRO (4×4/8×8), MHUB 4K (4×4/8×8), MHUB 2K (4×4/8×8) | 1 | Video Matrix | Serial & IP | Switching, power* | N/A | 371kb |
|
Multiroom+ V1, Multiroom+ V2, Multiroom + V3 | 1 | Video Matrix | Serial & IP | Switching, power* | N/A | 3.8mb |
|
3.52.636, 3.52.628 (UK-PKG-FF-44-HDBTLI), 3.50.62 (MOD44), 3.50.62 (MOD88) | 1 | Video Matrix | Serial & IP | Switching, power* | N/A | 1.2 |
|
Savant MHUB U (4×3+1)-(8×6+2), MHUB MAX (4×4), MHUB PRO (4×4/8×8) |
2 | Video Matrix | IP | Switching, power* | N/A | 12kb |
|
MHUB U (4×3+1)-(8×6+2), MHUB PRO (4×4/8×8), MHUB MAX (4×4), MHUB 4K (4×4/8×8), MHUB 2K (4×4/8×8) | 1 | Video Matrix | Serial & IP | Switching, power* | N/A | 331kb |
|
Multiroom+ V1, Multiroom+ V2, Multiroom + V3 | 1 | Video Matrix | Serial & IP | Switching, power* | N/A | 3.9mb |
|
3.52.636, 3.52.628 (UK-PKG-FF-44-HDBTLI), 3.50.62 (MOD44), 3.50.62 (MOD88) | 1 | Video Matrix | Serial & IP | Switching, power* | N/A | 649kb |
| iRemote | MHUB U (4×3+1)-(8×6+2), MHUB PRO (4×4/8×8), MHUB MAX (4×4), MHUB 4K (4×4/8×8), MHUB 2K (4×4/8×8) | 1 | Video Matrix | Serial & IP | Switching, power* | N/A | 2kb |
|
MHUB U (4×3+1)-(8×6+2), MHUB PRO (4×4/8×8), MHUB MAX (4×4), MHUB 4K (4×4/8×8), MHUB 2K (4×4/8×8) | 1 | Video Matrix | Serial & IP | Switching, power* | N/A | 3kb |
|
MHUB U (4×3+1)-(8×6+2), MHUB PRO (4×4/8×8), MHUB MAX (4×4) | 2 | Video Matrix | IP | Switching, power* | N/A | 4kb |
|
MHUB AUDIO (6×4) | 2 | Audio Matrix | IP | Switching, volume control, power* | N/A | 16kb |
|
MHUB U (4×3+1)-(8×6+2), MHUB PRO (4×4/8×8), MHUB MAX (4×4) | 2 | Video Matrix | IP | Unit discovery, auto IP healing, switching, full state reporting with 2-way feedback, IP2IR (IR port expansion), power* | |
956kb |
|
MHUB AUDIO (6×4) | 2 | Audio Matrix | IP | Unit discovery, auto IP healing, switching, volume control, full state reporting with 2-way feedback, power* | N/A | 956kb |
|
Multiroom+ V1, Multiroom+ V2, Multiroom + V3 | 1 | Video Matrix | Serial & IP | Switching, power* | N/A | 18mb |
|
3.52.636, 3.52.628 (UK-PKG-FF-44-HDBTLI), 3.50.62 (MOD44), 3.50.62 (MOD88) | 2 | Video Matrix | IP | Switching, power* | N/A | 3.8mb |
|
MHUB U (4×3+1)-(8×6+2), MHUB PRO (4×4/8×8), MHUB MAX (4×4), MHUB 4K (4×4/8×8), MHUB 2K (4×4/8×8) | 1 | Video Matrix | Serial & IP | Switching, power* | N/A | 5kb |
|
MHUB U (4×3+1)-(8×6+2), MHUB PRO (4×4/8×8), MHUB MAX (4×4), MHUB 4K (4×4/8×8), MHUB 2K (4×4/8×8) | 1 | Video Matrix | Serial & IP | Switching, power* | N/A | 14kb |
|
MHUB U (4×3+1)-(8×6+2), MHUB PRO (4×4/8×8), MHUB MAX (4×4), MHUB 4K (4×4/8×8) | 2 | Video Matrix | IP | Switching, power* | N/A | 7kb |
|
MHUB U (4×3+1)-(8×6+2), MHUB PRO (4×4/8×8), MHUB MAX (4×4), MHUB 4K (4×4/8×8) DRIVER REQUIRES LICENSE ACTIVATION FROM VENDOR. I need help |
2 | Video Matrix | IP | Switching, Two way IP control | N/A | (4×4) (8×8) |
Older MHUB models
Download a control driver pack (IP/RS232/IR) for older MHUB 2K and 4K systems (2014-2016) here
Legacy system RS232 protocol
Follow our RS232 connection guidelines to connect to your MHUB system using RS232.
*not all MHUB systems support power control over API. Please contact HDANYWHERE to confirm if your chosen control driver supports this feature.