HDanywhere Multiroom+ PoE and 4×4 V3 System IP Software
The Multiroom+ PoE and 4×4 V3 systems have a user accessible web page built into them. This web page has an address that you type into a web browser (such as internet explorer or Google Chrome) and it allows you to control the matrix as well as change settings to do with the central hub.
All of the multiroom+ PoE and 4×4 V3 units ship with these default network settings:
IP Address: 192.168.1.88
Subnet mask:255.255.255.0
Default gateway:192.168.1.1
In most cases these will need to be changed to work with the network the central hub is connect to.
To achieve this, you first need to connect the central hub LAN port on the rear of the main hub to a Lan socket on your home network hub or router. Once this has been done, you need to discover the central hub on your network.
Once this software is installed on your PC, you’ll be able to discover and set the central hubs’ network settings. Instructions on how to do so are included in the associated system manual.
Please follow the link below to download the software: