Using the HDC Trade Modular System Builder

The Modular System Builder is an invaluable tool when you need to get a quote or setup a Modular system quickly and correctly. But before you do start configuring your system make sure that you note the following:

1. The Modular Chassis options for the 4×4 and 8×8 have different power requirements.
   1. The 4×4 can be fitted with an optional PSU module if a redundant power supply option is needed. It’s should be set to 1 as a default.
   2. The 8×8 has its power supplies built in to the unit. There is no need to add any if you are specc’ing one of these.
2. IEC power cables
   1. You will need x1 cable per PSU module, again the default should be set to 1
   2. 8×8′s will require x2 IEC cables are the main unit contains two power supplies
3. Blank plates for unused ports can only be added to 8×8 systems
4. Forwards IR is only supported by the 8×8 and needs additional configuration – please call us 01684 576 348 if you need this functionality or contact us.
5. IR hardware is sold as an individual units, you will need to add as many transmitters and receivers as you need, HDMI Input/Output modules do not support IR Passback
6. HDanywhere SmartControls are pre-programmed to operate with the Modular Chassis included in the builder.