mHub 4K control system integration

The mHub 4K range has full support for most popular control systems via serial (RS232) or IP.

All control strings and current available drivers are available in the mHub control pack, available here – Download
IP control

To control the mHub 4k unit via IP you will first need to discover it by using the mHub controller software available in the control pack above

The mHub 4K will acquire an IP address via DHCP the first time it is connected to your home network, use the controller software to locate it on your network.

In the mHub controller software select IP and then press the ‘search’ button, this should locate your mHub matrix. Press ‘connect’ the red button should turn green.

Press the configure button

From here you can set the matrix to a static IP if you wish (this is generally good practice)

Your matrix is now on your home network and will be able to receive IP commands from whatever control system you are using.

Looking for the mHub 2K information, go here – mHub 2K