RS232 Serial, IR and IP Codes for discontinued HDanywhere products
RS232 Serial and IR Codes for HDanywhere – HKM42-UK, HKM42BTP, HKM44-UK – HKHA414SW – HKHDA44P
The documents below contain the RS232 serial, IR codes and IP codes, where applicable, for our HDanywhere matrix range.
These control codes can be used to integrate our matrix devices with 3rd party remote controls and control systems where we don’t have existing drivers.
Models covered are HKM44-UK (both V1 and V2), HKHA414SW (V1, V2 and V3). Codes are broken down into separate documents, appropriately titled.
Please check our separate article with existing drivers to make sure we don’t already support your system.
If you need help identifying whether you have a V1,V2 or V3 of your product, then please contact us on (+44) 01684 576 348. If you purchased your HKM44-UK or HKHA414SW after August 2012, it will most likely be V2, if you purchased your HKHA414SW after April 1st 2013 it is most likely V3. All items purchased before August 2012 will be V1.
If you need any further information or support,
you can contact customer services here.
**Please note : Serial control for HKM44 and HKHA414SW V1 and V2 is not compatible with Control4 HC800 and HC250 controllers
Please click on the link below that matches your model number and the type of codes you need.