Loxone API 2.0 installation guide

The latest control driver from Loxone can be downloaded here

The Loxone API 2.0 driver is compatible with the following HDANYWHERE products:

MHUB431U
MHUB862U
MHUB4KPRO44
MHUBPRO4440
MHUB4KPRO88
MHUBMAX44
MHUBAUDIO64

and the following Loxone products:

Miniserver
Miniserver Go

IMPORTANT

Before setting up the Loxone driver, the MHUB must have been through its first boot process. This can be done by navigating to the MHUB’s IP address in a web browser or in uControl and following the onscreen instructions. No other setup of the matrix is required.

Add the HDANYWHERE MHUB device template as a “Virtual Output”

Next, assign your Inputs and outputs

The video below shows the entire process